nick
AGA Bounty
Posts: 555
|
Post by nick on Jan 3, 2019 11:50:46 GMT -5
I would like four of these. How do I go about ordering and paying for them? Send me a private message here on the board and we'll get it worked out. |
|
|
|
Post by fizzle1979 on Jan 5, 2019 16:32:10 GMT -5
I would like four of these. How do I go about ordering and paying for them? Send me a private message here on the board and we'll get it worked out. Done! I got my Farm Plus and Farm XL yesterday. |
|
|
|
Post by drbanks on Jan 7, 2019 14:04:42 GMT -5
Just out of curiosity, nick, what type of plastic are you using? I s'pose PLA would be perfectly adequate and cheap for the job. I'm right on the verge of printing nylon, which of course requires an all-metal hot end, and some magic stuff to get the print to adhere to the bed. I figure if I can print nylon, that should be an ideal material for tricking out the machines...
|
|
nick
AGA Bounty
Posts: 555
|
Post by nick on Jan 7, 2019 15:40:01 GMT -5
Just out of curiosity, nick, what type of plastic are you using? I s'pose PLA would be perfectly adequate and cheap for the job. I'm right on the verge of printing nylon, which of course requires an all-metal hot end, and some magic stuff to get the print to adhere to the bed. I figure if I can print nylon, that should be an ideal material for tricking out the machines... Yeah for the water port covers I've just been using PLA on FFF printers because it's free and easy. If I want to use a different type of material in an FFF printer I'd just need to pay for the cost of the material. I've got access to just about every type of material and printer there is for a small fee if I had a need for them. Our maker labs have SLA, Continuous Fiber, LOM, MJP, and Polyjet 3D printers. We've also cut laser cutters and robotic CNC machines. I used the laser cutter to etch some logos into the aluminum shell of my laptop. That was pretty fun. |
|
|
|
Post by drbanks on Jan 7, 2019 16:06:42 GMT -5
That is totally cool!
I'm stuck with what I can personally afford :(
|
|
nick
AGA Bounty
Posts: 555
|
Post by nick on Jan 7, 2019 19:55:03 GMT -5
That is totally cool! I'm stuck with what I can personally afford :( I might have given in on a 3D printer by now if not for the access at work. I am well aware of how fortunate that is and that’s one of the reasons I want to help folks here when I can. |
|
MaryL
AGA Farmer
Posts: 3,532 
|
Post by MaryL on Jan 9, 2019 18:28:04 GMT -5
God I love you guys. I’m totally happy-geeking out just listening to you, even though I don’t know this stuff. I get it just enough to be able to enjoy it! Cheers to you!
|
|
nick
AGA Bounty
Posts: 555
|
Post by nick on Jan 14, 2019 17:39:16 GMT -5
 I shipped all of these covers off to folks here on the board today! It’s a real treat knowing folks are out there getting use out of something I designed. 🙂 |
|
Shawn
Administrator
Posts: 16,267
|
Post by Shawn on Jan 14, 2019 18:25:49 GMT -5
Nice looking covers there
|
|
|
|
Post by fizzle1979 on Jan 15, 2019 22:57:11 GMT -5
I shipped all of these covers off to folks here on the board today! It’s a real treat knowing folks are out there getting use out of something I designed. 🙂 I like all those colors. Can’t wait to find out what I ended up with. |
|
mike
The Pepper King
Posts: 3,661 
|
Post by mike on Jan 16, 2019 15:54:07 GMT -5
I received the green ones today, Nick, thanks.
|
|
nick
AGA Bounty
Posts: 555
|
Post by nick on Jan 16, 2019 22:00:02 GMT -5
I received the green ones today, Nick, thanks. You’re quite welcome! |
|
|
|
Post by fizzle1979 on Jan 17, 2019 22:36:40 GMT -5
Got my blue ones today...thanks!
|
|
ASFx
AGA Sprout
Posts: 130
|
Post by ASFx on Mar 12, 2019 4:49:45 GMT -5
Ohh very nice nick ! i finally found the source of these nice port covers i've seen in people's photos. It's so odd that Aerogarden wouldn't include covers for these already. I'd love to request 8 of them for my Farm and Farm Plus units. I'll send you a PM  |
|
|
|
Post by greenfly on Mar 14, 2019 17:51:05 GMT -5
Also: If any other Farm owners would like a set of these, just let me know. I'd be happy to ship some to you free of charge.  Hi Nick, could you send me 4 for my two farms, I would happily cover shipping + thanks Chris PM me |
|
|
|
Post by leonard on Mar 16, 2019 20:27:20 GMT -5
Hi there Ya'll. First post here and a new owner of the Farm plus. I wanted to print out a couple of those covers and downloaded the STL from Thingiverse but it will not slice correctly. It only prints out the tab on the bottom. It will not print out the top cover and it does not even see it in the slicer. I even re-downloaded the file but it still does the same thing. Any help would be Great!!!
|
|
Shawn
Administrator
Posts: 16,267
|
Post by Shawn on Mar 17, 2019 3:33:24 GMT -5
I am sure nick will get back to you. Please be patient |
|
nick
AGA Bounty
Posts: 555
|
Post by nick on Mar 17, 2019 6:36:25 GMT -5
Hi there. I just grabbed the files from Thingiverse and sliced them again to verify that it still works for me. Everything seems okay on my end.
Are you slicing the file with two covers or a single cover?
I wish I could offer more help but I truly have no clue as to why it wouldn’t slice properly. You’re the first person that’s reported any trouble with the file and I know others have printed it.
|
|
|
|
Post by leonard on Mar 17, 2019 11:31:00 GMT -5
I tried both files and I finally had to import it to meshmixer to repair the mesh. I even tried 3 different slicers and that didn't work either. It's printing now! Thank you for the file!!!
|
|
Shawn
Administrator
Posts: 16,267
|
Post by Shawn on Mar 17, 2019 11:43:06 GMT -5
I tried both files and I finally had to import it to meshmixer to repair the mesh. I even tried 3 different slicers and that didn't work either. It's printing now! Thank you for the file!!!
Happy to hear you got it to work
|
|
